Issues‎ > ‎vol22n1‎ > ‎

jzs-10771

Geological study of Aqra Formation for possible use as Portland cement in Chwarta-Mawat area Sulaimani – Iraqi Kurdistan Region

Chro Muhammad Fatah1. Kamal Haji Karim Ahmad1 and  Tola Ahmad Mirza1               

 

1 Department of Geology, College of Science, University of Sulaimani, Sulaimani, Kurdistan Region- Iraq


Original: 3 November 2019       Revised: 20December 2019      Accepted: 30 January 2020         Published online: 20 June 2020  


Doi Linkhttps://doi.org/10.17656/jzs.10771


Abstract

A succession of highly fossiliferous limestone of Aqra Formation is studied geochemically and strati graphically. The outcrops of succession have the thickness, width and length of about 160, 1500 and 30000 meters respectively. The outcrops located in the Chwarta-Mawat area in the Kurdistan Region, northeastern Iraq. An exposed section is selected for field and lab studies, and inspected by eyes and hand lenses. Twelve samples are taken for geochemical analyses and indication of possible use of the succession for   Portland cement production.  The analysis shows that the   whole succession is consist of calcitic limestone which contains more than 95 % of CaCO3, less than 1% MgO, Fe2O3, Al2O3, Na2O, and K2O. The analyses show that the limestone is high grade limestone which is very suitable for Portland cement production. In the area there is good quality and quantity of claystone as correctors’ materials for the clinker. These claystone belong to the unit one of the Red Bed Series which extensively exposed directly to the north and northeast of the sampled section of the Aqra Formation. The results show that the Aqra limestone can be used in cement industry. The Ratios of the alumina modulus (AM), Hydraulic modulus (HM), silica modulus (SM) and lime saturation Factor (L.S.F) were also calculated. It was found that these ratios of some samples are compatible to Standards Specifications and other are not therefore some quantity of claystone from lower part of Red Bed Series were added to compensate for the percentage of silica, alumina and iron oxides for the suitable limestone as well as lowering the LSF values to acceptable ranges.  It was found that most of the clinker phases of the studied samples have a good agreement with these typical constituents of normal Portland cement.


Key Words: Aqra Formation, Mawat area, Late Cretaceous carbonate, Portland cement, Chemical Composition, Clinker phases

      References

[1] Al-Ali, S.H.A., "Assessment of cement produced at Kufa cement plants and the raw materials used in its manufacture". Unpublished, M.Sc. Thesis, University of Basrah, (in Arabic). (2004).

[2] Al-Auweidy, M.R.A., "Qualitative, Quantitative and Radiological Assessment of marl layer in the Euphrates Formation for Portland cement industry in Kufa cement quarryat Al-Najaf Governorate", Unpublished M.SC thesis, University of Baghdad, College of Science, pp.136. (2013).

[3] Aldieb, M.A., & Ibrahim, H.G., Member IAENG, "Variation of Feed chemical Composition and its Effect on Clinker Formation- Simulation Process", proceeding of the world congress on engineering and computer Science, San Francisco, USA. (2010).

[4] Alemayehu, F & Sahu, O. "Minimization of Variation in Clinker Quality". Advances in Materials. Vol. 2, No. 2, pp. 23-28. (2013).

[5] Al-Mehaidi, H. M. "Tertiary   Nappe in Mawat Range, N.E   Iraq", Jour. Geol. Soc. Iraq, Vol. 8, pp. 31-44. (1975).

[6] Ameen, B.M., "Lithostratigraphy and Sedimentology of Qamchuqa Formation from Kurdistan Region, NE−Iraq". Unpublished Ph D. Thesis. University of Sulaimani, pp. 147. (2008).

[7] Amin, C. M. F. "Assessment of Avroman limestone Formation for Portland cement industry, Halabja area south-east Sulaimani, Kurdistan Region NE-Iraq",  Unpublished  MSc.  Thesis, University of Sulaimani, Department of Geology, pp. 164. (2014).

[8] Alao,  A.  W., "Chemical  and  mineralogical  assessment  of  Okeluse-  Arimogija limestone  and  shale  deposits  as  raw  materials  for  the  production  of  Portland  cement", Unpublished. M.Sc. thesis, Univ. of Hull, 87pp. (1979).

[9] Bediako, M. Amankwah,E. O. "Analysis of Chemical Composition of Portland Cement in Ghana: A Key to Understand the Behavior of Cement", Hindawi Publishing Corporation Advances in Materials Science and Engineering, Article ID 349401, pp. 5. (2015).

[10] Bouazza , N.; EL Mrihi A.; Maate A. "Geochemical assessment for cement manufacturing".  Jour.   Procedia Technology, Vol. 22 pp. 211-218. (2016).

[11] Brandt, A. M. "Cement-Based Composites". Second Edition, Taylor& Francis, London, UK. pp. 536. (2009).

[12] British Geological Survey, "Cement raw materials", Natural Environment Research Council, pp. 20. (2005).

[13] Buday T and Jassim S Z, "The Regional geology of Iraq", Tectonism Magmatism, and Metamorphism. I.I. Kassab and M J Abbas and Jassim, S Z (Eds), GEOSURV, Baghdad, Iraq, pp. 445. (1987).

[14] Buday,  T.,  "Regional  geology  of  Iraq",  Stratigraphy:  I.I.M.  Kassab  and  S.Z.Jassim (Eds) D.G. Geol. Surv. Min. Invest. Pub. Vol.1, pp. 445. (1980).

[15] Chatterjee, A.K., "Phase composition, microstructure quality and burning of Portland cement- a review of phenomenological interrelations- Part 2", World cement technology, Vol.10, No.5, pp. 165 – 172. (1979).

[16]Duda, W. H."Cement Data Book",  International process engineering in the cement industry, Third Edition, Bauverlag, GmbH, Wiesbaden and Berlin, Macdonald and Evans, London, pp. 636. (1985).

[17] Duda. W. H., "Cement Data Book", International process engineering in the cement Industry, 2nd Completely revised and enlarged new ed. Bauverlag G M B H Wissbaden and Berlin. Macdonald and Evans, London. (1977).

[18] Dutta, D., "Utilization of Blast Furnace Slag as a Raw Material for Manufacturing of Portland Cement Clinker", MS.C, thesis, National Institute of Technology Rourkela, Ceramic Engineering, pp. 67. (2011).

[19] El-Hafiz N.A.A., El-Moghny M.W.A., El-Desoky H.M., Afifi A.A. "Characterization and technological behaviour of basalt raw materials for Portland cement clinker production", International Journal of Innovative Science, Engineering & Technology, Vol. 2. (2015).

[20] Hung C, Arthur L. C.F, Andrew J. J, Pemichael I. M., Herman H. T, "Cement plant operations handbook  For Dry Process Plants", PAA / Bern / pp. 159. (2003).

[21] Jassim SZ, Goff JC, "Geology of Iraq". Dolin, Prague and Moravian Museum, Berno, pp. 341. (2006).

[22] Karim KH, "Basin analysis of Tanjero Formation in Sulaimaniya area, NE-Iraq". PhD thesis, University of Sulaimani University, pp. 135. (2004).

[23] Karim KH, Ahmad SH, Esmael HF, "Thrust fault in the Maastrichtian sequences of Mawat area, NE Iraq", Iraqi Bulletin of Geology and Mining, Vol. 13, No. 1, pp. 63 – 77. (2017).

[24] Karim, K. H and Surdashy A. M. "Sequence Stratigraphy of Upper Cretaceous Tanjero Formation in Sulaimaniya area, NE-Iraq". KAJ, Vol. 4, No.1, pp. 19-42. (2006).

[25] Karim, K. H. and. Solaiman S.H, "Origin of lateral thrust in Mawat Area, Kurdistan, NE-Iraq". First International Conference on Petroleum and Mineral Resources, Koyia University, Koyia Town, WIT Press, pp.183-195. (2012).

[26]  Karim,K.H., Baziany, Sharbahzeri, K.I. "Origin of Fossiliferous Limestone Beds inside the Upper Part of Tanjero Formation at the Northwest of Sulaimani Area, Kurdistan Region, NE-Iraq",  Journal of Zankoy Sulaimani (JZS), Vol. 17, No. 1, pp. 155-165. (2015).

[27] Lea F. M. "Chemistry of Cement and Concrete", Third Edition, Edward Arnold (Publishers) Ltd., U.K. (1976).

[28] Mirza T.A., Fatah C. M. "Evaluating the suitability of Avroman limestone, Halabja governorate for cement industry", Iraqi Bulletin of Geology and Mining Vol.14, No.1, pp. 103 -120. (2018).

[29] Mirza T.A., Mohialdeen I.M.J.  Al-Hakarri, S.H. and Fatah C. M. "Geochemical assessment of Naopurdan limestone for cement making - Chwarta area, Kurdistan Region, NE Iraq", Journal of Zankoy Sulaimani (JZS) Special Issue, GeoKurdistan II, pp. 257-267. (2016).

[30] Newman, J. and Choo, B.S. "Advanced Concrete Technology", Constituent Materials. 1st edition.: Butterworth Heinemann, Elsevier, UK. pp. 288. (2003).

[31] Rao D.S., Vijayakumar T.V., Prabhakar S., and Bhaskar Raju G. "Geochemical assessment of a siliceous limestone sample for cement making", Chin. J. Geochem Vol. 30, pp. 033–039. (2011).

[32] Sadiq, D. M. "Facies analysis of Aqra Formation in Chwarta-Mawat Area from Kurdistan Region, NE−Iraq". Unpublished MSc thesis, College of Science, University of Sulaimani. pp. 105.(2009).

[33] Thanoon, T. A. "Assessment of Shiranish Formation from Sinjar area, NW Iraq for Portland cement Manufacture", 4th Inter. Conf. On Geochemistry, Alex, Univ., Egypt. Sept., pp. 237-243. (1999).

 



Comments