Properties of High-Strength Fibrous Concrete with Crushed Stone as Coarse Aggregate

Authors

  • Shler Saeed Kadir Civil Engineering Department, Duhok Technical Institute, Kurdistan Region, Iraq. Author

DOI:

https://doi.org/10.17656/jzs.10149

Keywords:

Vibration characteristics, Cutting parameters, Head stock

Abstract

This paper presents a study of vibration characteristics in headstock of a lathe machine, at different cutting parameters. These parameters are the cutting speed; the depth of cut and the feed rate .The transducer were used on the headstock in two directions, the vertical and horizontal (feed) direction, Also for a time domain of (l0sec) in both directions. The results show that the effect of the vertical vibrations is more significanf than the horizontal (feed) direction, for all of the cases investigated in this paper. Unlike the veriical vibration, the horizontal vibration is lower and steadier, when the cutting speed, the depth of cut and the feed rate are increased, Whereas the vertical vibration shows a great fluctuation when these parameters are increased.

References

Lars Hikansson,"Adaptive Active Control of Machine-Tool Vibration in a lathe", Thesis, Lund,1999.

S.S. Rao,"Mechanical Vibrations", P.572. New York; Addison-Wesley.1202C. Schaffer and P.S. Heyns. 1995.

Sanjanwatra, A., Choudhury, S., K.o and Jain, V.K.,"On-Line tool wear sensing and conrpensation during Turning operation", precise Eng. 1990, 12 (2), I 1 -84,. DOI: https://doi.org/10.1016/0141-6359(90)90031-S

Lrlichelett, G.F., Koinig, W., anO Victor, H.R.," In-process tool sensor for cutting operationl CIRP Ann, 1976,25 (2),483-496,

R.G. Silva," Cutting tool condition monitoring of the turning process, using artificial

intelligence", P lxD The sis, University of Glamorg a, 1997 .

Feliciano H. Japitana A., Koichi M., Yoshimi T.,"6-Axis control cutting of

overhanging curved grooves by means of non-rotational tool with application of

ultrasonic vibrations", International Journal af Machine Tools& Mandacture2Ut*, 44479-484.

Chrunxiang Naa, E. Shamoto b., T. Moriwaki C., Lijiang Wangd," Study of

machine accuracy in ultrasonic elliptical vibration cutting", International Journal of

Machine Tools & Manufacture 2004, 44, 1305- 1310. DOI: https://doi.org/10.1016/j.ijmachtools.2004.04.014

T. inspirer, G. Step, Ana, P.V" Baylyb, B.P. Mannb,"Multiple chatter frequencies in

mitling proqess", Journal of Sound and Vibrational |3 ,262 ,333'345'

T.H. childr,"Metal cutting theory and application", Arnolds, London 2000.

Published

2005-12-03

How to Cite

Properties of High-Strength Fibrous Concrete with Crushed Stone as Coarse Aggregate. (2005). Journal of Zankoy Sulaimani - Part A, 9(1), 59-68. https://doi.org/10.17656/jzs.10149

Most read articles by the same author(s)

1 2 3 4 5 6 7 8 9 10 > >>