Direct on Line Operation of Three Phase Induction Motor using MATLAB

Authors

  • Adil Omar Department of Electrical Engineering, College of Engineering, University of Sulaimani, Kurdistan Region, Iraq. Author
  • Alaa M. Abdulrahman Department of Electrical Engineering, College of Engineering, University of Sulaimani, Kurdistan Region, Iraq. Author
  • Ghamgeen I. Rashed Department of Electrical Engineering, College of Engineering, University of Sulaimani, Kurdistan Region, Iraq. Author

DOI:

https://doi.org/10.17656/jzs.10754

Keywords:

Three-phase induction, Motor, Matlab, Modeling

Abstract

Induction motors are most widely used motors due to their reliability, robustness and low cost. However, huge starting current and sudden change in load current of three phase
induction motor are the most problems in high power applications since these lead to damage the motor. Therefore, controlling the current during transient is essential to protect
the motor from damage. In order to control current instantaneously, it is required firstly to model the motor and secondly to represent the rotational three phase (current and voltage) in
stationary frame and this can be done using DQ modeling. The DQ modeling proposed in literature, the effect of friction was neglected and this reduces the correctness of the
modeling. This Paper will look at the DQ modeling and method of starting up of the three phase induction motor. At first, the novelty of this paper is to find the friction of the motor
practically and include it in the DQ model. Then, it calculating three phase induction motor parameters which will help in the modeling process Then, it uses the direct on line method
(DOL) to validate the DQ model using MATLAB/Simulink.

References

Shakuntla Boora, S. K Agarwal, K. S Sandhu, "Dynamic d-q axis modeling of three-phase asynchronous

machine using matlab", International Journal of Advanced Research in Electrical, Electronics and

Instrumentation Engineering, Vol. 2, pp. 3942-3951, (2013).

. K.L. Shi, T.F. Chan, Y. K. Wong and S. L. Ho, "Modeling and simulation of the three-phase induction

motor using Simulink", International Journal of Electrical Engineering Education, Vol. 36, pp. 163- 172,

(1999).

Vithayathil, J., "Power electronics principals and applications", Mc Graw-Hill International, (2006).

Ramon C. Orost, Guillermo O. Forte, Luis Canali, "Scalar Speed Control of dq Induction Motor Model

Using Fuzzy Logic Controller", (2007).

K. Ogata, "Modern Control Engineering", Prentice Hall, (2009).

Civan Artun , Ertan Maviş Coşku Kasnakoğlu "Simulation Time Analysis of MATLAB/Simulink and

LabVIEW for Control Applications".

. Lee, R.J., Pillay, P., and Harley, R.G., "D, Q Reference frame for the simulation of induction motors",

Electric Power Systems Research Journal, Vol. 8, pp. 15-16, October (1984). DOI: https://doi.org/10.1016/0378-7796(84)90030-0

Mohamad M. Abboud, Matz Lenells, Pieternella Cijvat, "Simulation of 3ph induction motor in Matlab

with Direct and Soft starting methods .15-06-04.

S.Z.Mohammad Noor, M.K.Hamzah, P.N.A. Megat Yunus "Three Phase Induction Motor Analysis using

MATLAB/GUIDE", 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO2013),

Langkawi, Malaysia. 3-4 June (2013).

Keli Shi., T.F. Chan. Y.K. Wong, "Modelling of the three-phase induction motor using Simulink", Vol.

, pp. 163–172, Manchester U.P.

G. Renukadevi, K. Rajambal, "Generalized Model of Multi-Phase Induction Motor Drive using Matlab/Simulink",

IEEE PES Innovative Smart Grid Technologies – India.

Published

2019-12-20

How to Cite

Direct on Line Operation of Three Phase Induction Motor using MATLAB. (2019). Journal of Zankoy Sulaimani - Part A, 21(2), 21-34. https://doi.org/10.17656/jzs.10754